Nereus Alarms Ltd

| Home | Products & Prices | How to Buy | Information | Press | Contact Us | About Us | Site Map |  


Quick Links

WG100-P - Petrol Vapour Alarm for Boats & RIBs

WG100-P - click image to enlarge

WG100-P - Single Sensor Petrol Vapour Alarm System 309.60 inc VAT


Click to read more >>>

A Complete Range of Alarms

Nereus Alarms offer a range of alarm systems for detecting petrol vapour. Designed specifically for use on boats and RIBs, these systems use modern electronics and design techniques to provide unrivalled protection.

The Need for a Petrol Vapour Alarm

Petrol vapour is often used as a fuel for inboard and outboard engines of boats, tenders and RIBs. Petrol is very volatile and easily ignited. A small leak of petrol can therefore quickly lead to a very dangerous situation. If the petrol vapour is allowed to build up in a confined space and ignition occurs an explosion will result.

The Usual Problem - Water Damaged Sensors

Traditional petrol vapour sensors mounted in any wet area are prone to water damage. Once wet, these sensors are permanently damaged and often give a continuous false alarm. Not knowing whether the alarm is due to a petrol leak or damaged sensor, the crew are left unsure how to act. Apart from the inconvenience, this results in an expensive repair and a period without protection.

The Solution - Unique Waterproof Sensor

Waterproof Gas SensorTo overcome this problem, Nereus Alarms has developed a unique waterproof sensor which is used in their WG range of alarm systems. These remarkable sensors will survive both splashing water and total immersion and are the only ones of their type on the market.

Whether you use your boat for business or pleasure, you will benefit from reliable protection without the trouble or dangers of water damaged sensors.

Other Features

The alarm systems are small, neat and stylish. They are easy to install (either flush or surface mounted), simple to use and require no maintenance. Lights on the control panel indicate power, fault (eg damaged wire to sensor) and alarm conditions. All models have an internal alarm buzzer, an output to drive additional remote sirens and a separate alarm relay output.

Fast Response & Low Power

The latest technology sensors combine fast response and high performance with very low power consumption. 


Model WG100-P

1x Petrol Vapour sensor

Alarm sensitivity

~10% LEL (lower explosive limit)

Operating voltage

12/24V (10 to 32 Vdc)

Current consumption

60mA (normal operation), 120mA (alarm)

Temperature range

-20C to +40C

Auxiliary buzzer output

300mA at supply voltage

Alarm relay output

SPCO, 1A contact rating

Control panel size

96x60x26mm (surface mounted), 96x60x5mm (flush mounted)

Sensor size

35x35x26mm (surface mounted), 35x35x5mm (flush mounted)

Downloads (pdf) & Links

pdf logo User Manual WG100-P >>>


pdf logo Installation Instructions >>>


pdf logo Stickers >>>


pdf logo Wiring Diagram >>>


 PV Information >>>


<<< back to Petrol Vapour Alarms for Boats & RIBs

Nereus Alarms Ltd
9 Britannia Road, Poole, Dorset. BH14 8AZ  UK
Tel: +44 (0)1202 731886